Stone Mountain Access Systems

Suspended Scaffold User Safety Training
2020-12-18 08:00 - 17:00, 2020-11-20 08:00 - 17:00, 2020-10-16 08:00 - 17:00, 2020-09-25 08:00 - 17:00, 2020-08-28 08:00 - 17:00, 2020-07-17 08:00 - 17:00 UTC | Hillside, IL, 4053 May Street, Hillside, IL, 60162, United States
Recommended for anyone that works from suspended scaffolds. This course meets the City of Chicago requirement for suspended scaffold user training. The course focuses on creating awareness of the hazards associated with suspended scaffolds and the procedures to follow for the safe work from and operation of these scaffolds. The course is also a good introduction course or refresher course for individuals involved with erecting suspended scaffolds.
RECOMMENDED FOR:
Anyone that works from suspended scaffolds.
COURSE OUTLINE:

The need for training
General safety information
Jobsite survey
Wire rope
Platforms
Hoists
Fall arrest
Electrical considerations
Hands on demonstration

The course begins in the classroom for approximately 4 hours of instruction and concludes with a 30-question multiple choice review. After a lunch break the class reconvenes for a hands-on session where students have an opportunity to see a motor in operation. The motor and its emergency systems are tested and demonstrated to the students. Students who wish to are encouraged to operate the motor themselves.
Students who complete the course receive a record of training card from Stone Mountain Access Systems. This card is valid for 4 years.
CLASS SIZE:
Class sizes typically range from 1 to 50 with the optimal size being about 20. The time for the course extends with larger classes due to increased discussion time.
COST: contact the Hillside office or email sales@stonemountainaccess.com to inquire about current pricing.

Competent Person Training for Suspended Scaffolds
2020-07-08 08:00 - 17:00 | Fort Pierce, FL, 2800 Industrial Ave. #3, Fort Pierce, FL, 34946, United States
Recommended for individuals that the employer is desiring to designate as a competent person for suspended scaffolds. In addition to meeting the City of Chicago requirement for suspended scaffold user training this course goes more in depth and has an extended hands-on component to it. The course is intended for experienced users that the employer is wanting to give the designation of Competent Person. The course is an 8-hour class that ends with an 80-question exam. Students who pass the exam with a 70% or better receive a wallet card that says they completed a Competent Person Course for Suspended Scaffolds. Students who score below a 70% will receive a wallet card saying that they attended a Suspended Scaffold User Safety Course.
Note: no training course in itself makes anyone competent. Employers still are responsible to ensure that their competent people have the knowledge and abilities to recognize the hazards on their job sites.
COURSE OUTLINE:

The need for training

OSHA discussion

General safety information

Jobsite survey

Wire rope

Platforms

Hoists

Fall arrest

Electrical considerations

Hands-on build of a Rolling Roof Rig and 3-meter platform

Motor hands-on demonstration

The course begins in the classroom where there is about 6 hours of instruction. The class will then build Rolling Roof Rigs with assigned outreaches. They will have to determine the number of counterweights to use on the Scaffold according to the counterweight formula. Proper installation and discussion of Primary Wire Rope and Tieback Wire Rope will be demonstrated. The class will also construct 3-meter platforms. A motor and its emergency systems will be tested and demonstrated to the students. Students who wish to are encouraged to operate the motor themselves. Finally, the students return to the classroom to take the 80-question exam.
CLASS SIZE:
Class sizes range from 4 to 20 with the optimal size being about 9. The time for the course extends with larger classes due to increased discussion time.
COST: please contact the Daytona office for pricing information
Students who complete the course receive a record of training card from Stone Mountain Access Systems which is valid for 3 years.

CPR/AED First Aid Training
2020-07-02 08:00 - 17:00 | Pensacola, 4600 McCoy Dr, Pensacola, FL, 32503, United States
29 CFR §1926.50(c) states; “In the absence of an infirmary clinic, hospital, or physician, that is reasonably accessible in terms of time and distance to the worksite, which is available for the treatment of injured employees, a person who has a valid certificate in first-aid training from the U.S. Bureau of Mines, the American Red Cross, or equivalent training that can be verified by documentary evidence, shall be available at the worksite to render first aid.”
OSHA Letter of Interpretation dated January 16, 2007 states that “OSHA has long interpreted the term “near proximity” to mean that emergency care must be available within no more than 3-4 minutes from the workplace, an interpretation that has been upheld by the Occupational Safety and Health Review Commission and by federal courts.”
Stone Mountain Access Systems’ Trainer is certified to provide the American Heart Association First Aid course. This course provides basic first aid and safety skills, equipping individuals to recognize and provide basic first aid care for injuries and sudden illnesses. Students will learn how to identify and care for a variety of medical emergencies, including severe bleeding, shock, musculoskeletal injuries and other sudden illnesses, as well as how to reduce the risk of disease transmission while providing care.
COST:
Please contact your local Stone Mountain Access representative for a quote.
Students will receive a wallet card upon completion of the training.

Per CFR 29 §1910.1030(g)(2)(i) The employer shall train each employee with occupational exposure in accordance with the requirements of this section. Such training must be provided at no cost to the employee and during working hours. The employer shall institute a training program and ensure employee participation in the program.
This training meets that OSHA requirement to have designated first aid providers trained in how to protect themselves and injured persons from the transfer of harmful pathogens from one to the other.
COST: Contact the Pensacola office for current pricing information.
Students will receive a wallet card upon completion of the training

Suspended Scaffold User Safety Training
2019-12-20 08:00 - 16:00, 2019-11-15 08:00 - 16:00, 2019-10-18 08:00 - 17:00, 2019-09-20 08:00 - 16:00, 2019-08-16 08:00 - 16:00, 2019-07-19 08:00 - 16:00, 2019-07-17 08:00 - 16:00, 2019-05-17 08:00 - 16:00 and 3 more dates | Hillside, IL, 4053 May Street, Hillside, IL, 60162, United States
Recommended for anyone that works from suspended scaffolds. This course meets the City of Chicago requirement for suspended scaffold user training. The course focuses on creating awareness of the hazards associated with suspended scaffolds and the procedures to follow for the safe work from and operation of these scaffolds. The course is also a good introduction course or refresher course for individuals involved with erecting suspended scaffolds.
RECOMMENDED FOR:
Anyone that works from suspended scaffolds.
COURSE OUTLINE:

The need for training
General safety information
Jobsite survey
Wire rope
Platforms
Hoists
Fall arrest
Electrical considerations
Hands on demonstration

The course begins in the classroom for approximately 4 hours of instruction and concludes with a 30-question multiple choice review. After a lunch break the class reconvenes for a hands-on session where students have an opportunity to see a motor in operation. The motor and its emergency systems are tested and demonstrated to the students. Students who wish to are encouraged to operate the motor themselves.
Students who complete the course receive a record of training card from Stone Mountain Access Systems. This card is valid for 4 years.
CLASS SIZE:
Class sizes typically range from 1 to 50 with the optimal size being about 20. The time for the course extends with larger classes due to increased discussion time.
COST:
$250 for current customers
$300 for noncustomers

Competent Person Training for Suspended Scaffolds
2019-10-02 08:00 - 16:00 | Fort Pierce, FL, 2800 Industrial Ave. #3, Fort Pierce, FL, 34946, United States
Recommended for individuals that the employer is desiring to designate as a competent person for suspended scaffolds. In addition to meeting the City of Chicago requirement for suspended scaffold user training this course goes more in depth and has an extended hands-on component to it. The course is intended for experienced users that the employer is wanting to give the designation of Competent Person. The course is an 8-hour class that ends with an 80-question exam. Students who pass the exam with a 70% or better receive a wallet card that says they completed a Competent Person Course for Suspended Scaffolds. Students who score below a 70% will receive a wallet card saying that they attended a Suspended Scaffold User Safety Course.
Note: no training course in itself makes anyone competent. Employers still are responsible to ensure that their competent people have the knowledge and abilities to recognize the hazards on their job sites.
COURSE OUTLINE:

The need for training

OSHA discussion

General safety information

Jobsite survey

Wire rope

Platforms

Hoists

Fall arrest

Electrical considerations

Hands-on build of a Rolling Roof Rig and 3-meter platform

Motor hands-on demonstration

The course begins in the classroom where there is about 6 hours of instruction. The class will then build Rolling Roof Rigs with assigned outreaches. They will have to determine the number of counterweights to use on the Scaffold according to the counterweight formula. Proper installation and discussion of Primary Wire Rope and Tieback Wire Rope will be demonstrated. The class will also construct 3-meter platforms. A motor and its emergency systems will be tested and demonstrated to the students. Students who wish to are encouraged to operate the motor themselves. Finally, the students return to the classroom to take the 80-question exam.
CLASS SIZE:
Class sizes range from 4 to 20 with the optimal size being about 9. The time for the course extends with larger classes due to increased discussion time.
COST:
The base per student cost of the course $250
Students who complete the course receive a record of training card from Stone Mountain Access Systems which is valid for 3 years.

Competent Person Training for Suspended Scaffolds
2019-09-18 08:00 - 16:00, 2019-03-13 08:00 - 16:00 | Hillside, IL, 4053 May Street, Hillside, IL, 60162, United States

Competent Person Training for System Scaffolds
2019-07-30 08:00 - 17:00 | Fort Pierce, FL, 2800 Industrial Ave. #3, Fort Pierce, FL, 34946, United States
Recommended for individuals that the employer is desiring to designate as a competent person for system scaffolds. The SAIA has an alliance with OSHA and the fact that the employer has sent his Competent Persons through this third-party training carries weight with them.
Note: no training course in itself makes anyone competent. Employers still are responsible to ensure that their competent people have the knowledge and abilities to recognize the hazards on their job sites.
COURSE OUTLINE:

The need for training

The five most serious scaffold hazards

Decking material and loading

Stationary scaffold requirements

Rolling scaffold requirements

Tube and coupler scaffold requirements

System scaffold construction
Specialty uses of system scaffolds

Wall tie placement review

Stationary scaffold bracing

Cross braces as guardrails

Scaffold loads and load chart development

Hands on exercise

Exam

Students receive a comprehensive workbook with this course. Classes should be scheduled far enough in advance to give the students time to pre-study the workbook. This gives the students the maximum opportunity to be prepared with questions and also increases the scores on the 80 question multiple choice exam.
The course begins in the classroom where there is about 4 hours of instruction. After breaking for lunch the class participates in a hands on session which includes the construction of a small stationary scaffold and a rolling scaffold.
The class concludes with an 80 question multiple choice exam which is sent to the SAIA for grad
CLASS SIZE:
Class sizes range from 1 to 25 with the optimal size being about 10-15. The time for the course extends with larger classes due to increased discussion time.
COST:
Cost per student: $300
Students who receive a grade of 70% or better receive a frame ready certificate and a wallet card valid for 3 years.

Competent Person Training for Frame Scaffolds
2019-05-30 08:00 - 17:00 | Atlanta, GA, 200 Mendel Dr. S.W., Atlanta, GA, 30336, United States
Recommended for individuals that the employer is desiring to designate as a competent person for frame scaffolds. The SAIA has an alliance with OSHA and the fact that the employer has sent his Competent Persons through this third-party training carries weight with them.
Note: no training course in itself makes anyone competent. Employers still are responsible to ensure that their competent people have the knowledge and abilities to recognize the hazards on their job sites.
COURSE OUTLINE:

The need for training

The five most serious scaffold hazards

Decking material and loading

Stationary scaffold requirements

Rolling scaffold requirements

Tube and coupler scaffold requirements

Wall tie placement review

Stationary scaffold bracing

Cross braces as guardrails

Scaffold loads and load chart development

Hands on exercise

Exam

Students receive a comprehensive workbook with this course. Classes should be scheduled far enough in advance to give the students time to pre-study the workbook. This gives the students the maximum opportunity to be prepared with questions and also increases the scores on the 80-question multiple choice exam.
The course begins in the classroom where there is about 4 hours of instruction. After breaking for lunch the class participates in a hands on session which includes the construction of a small stationary scaffold and a rolling scaffold. This may be done utilizing actual scaffolding or a 1/3 scale model.
The class concludes with an 80-question multiple choice exam which is sent to the SAIA for grading.
CLASS SIZE:
Class sizes range from 1 to 25 with the optimal size being about 10-15. The time for the course extends with larger classes due to increased discussion time.
COST:
The base per student cost of the course $300.
Students who receive a grade of 70% or better receive a frame ready certificate and a wallet card valid for 3 years.

Competent Person Frame Scaffolds with System Scaffold endorsement
2019-05-30 08:00 - 16:00 | IL
2 day event 5/30 and 5/31/2019 from 8am to 5pm
Recommended for individuals that the employer is desiring to designate as a competent person for frame scaffolds. The SAIA has an alliance with OSHA and the fact that the employer has sent his Competent Persons through this third-party training carries weight with them.
Note: no training course in itself makes anyone competent. Employers still are responsible to ensure that their competent people have the knowledge and abilities to recognize the hazards on their job sites.
COURSE OUTLINE:

The need for training

The five most serious scaffold hazards

Decking material and loading

Stationary scaffold requirements

Rolling scaffold requirements

Tube and coupler scaffold requirements

Wall tie placement review

Stationary scaffold bracing

Cross braces as guardrails

Scaffold loads and load chart development

Hands on exercise

Exam

Students receive a comprehensive workbook with this course. Classes should be scheduled far enough in advance to give the students time to pre-study the workbook. This gives the students the maximum opportunity to be prepared with questions and also increases the scores on the 80-question multiple choice exam.
The course begins in the classroom where there is about 4 hours of instruction. After breaking for lunch the class participates in a hands on session which includes the construction of a small stationary scaffold and a rolling scaffold. This may be done utilizing actual scaffolding or a 1/3 scale model.
The class concludes with an 80-question multiple choice exam which is sent to the SAIA for grading.
CLASS SIZE:
Class sizes range from 1 to 25 with the optimal size being about 10-15. The time for the course extends with larger classes due to increased discussion time.
COST:
The base per student cost of the course $300.
Students who receive a grade of 70% or better receive a frame ready certificate and a wallet card valid for 3 years.

Competent Person Training for Suspended Scaffolds
2019-05-10 08:00 - 16:00 | Atlanta, GA, 200 Mendel Dr. S.W., Atlanta, GA, 30336, United States

Competent Person Training for Suspended Scaffolds
2019-04-02 08:00 - 16:00 | South Daytona, FL, 1801 S. Nova Rd. Bldg.#2, South Daytona, 32119, United States

Competent Person Training for Frame Scaffolds
2019-01-31 08:00 - 17:00 | Gainesville, FL, 6801 SW Archer Road, Gainesville, FL, 32608, United States

Competent Person Frame Scaffolds with System Scaffold endorsement
2019-01-31 08:00 - 16:00 | Gainesville, FL, 6801 SW Archer Road, Gainesville, FL, 32608, United States
2 Day event 1/31 and 2/1/2019 from 8am to 4pm
Recommended for individuals that the employer is desiring to designate as a competent person for frame scaffolds. The SAIA has an alliance with OSHA and the fact that the employer has sent his Competent Persons through this third-party training carries weight with them.
Note: no training course in itself makes anyone competent. Employers still are responsible to ensure that their competent people have the knowledge and abilities to recognize the hazards on their job sites.
COURSE OUTLINE:

The need for training

The five most serious scaffold hazards

Decking material and loading

Stationary scaffold requirements

Rolling scaffold requirements

Tube and coupler scaffold requirements

Wall tie placement review

Stationary scaffold bracing

Cross braces as guardrails

Scaffold loads and load chart development

Hands on exercise

Exam

Students receive a comprehensive workbook with this course. Classes should be scheduled far enough in advance to give the students time to pre-study the workbook. This gives the students the maximum opportunity to be prepared with questions and also increases the scores on the 80-question multiple choice exam.
The course begins in the classroom where there is about 4 hours of instruction. After breaking for lunch the class participates in a hands on session which includes the construction of a small stationary scaffold and a rolling scaffold. This may be done utilizing actual scaffolding or a 1/3 scale model.
The class concludes with an 80-question multiple choice exam which is sent to the SAIA for grading.
CLASS SIZE:
Class sizes range from 1 to 25 with the optimal size being about 10-15. The time for the course extends with larger classes due to increased discussion time.
COST:
The base per student cost of the course $300.
Students who receive a grade of 70% or better receive a frame ready certificate and a wallet card valid for 3 years.
